TCP / IP Address

<< Click to Display Table of Contents >>

Navigation:  Introduction > Creating Alerts and Reports > Conditional Alerts > Alert Conditions > Network Conditions >

TCP / IP Address


TCP/IP Address Alert Condition

TCP/IP Address Condition (Click to Zoom)


Network Conditions - TCP/IP Address

Verify that a TCP/IP Address is Visible


Scenario: The process you are using WinScry to support requires that a VPN connection be open. If the VPN is down, your process will fail. Solution: Use a TCP/IP Address Network Condtion to monitor the VPN.


Once configured a TCP/IP Address condition will ping the specified TCP/IP address every 3 minutes. If the ping fails the condition will be Activated. If it continues to fail long enough to pass the trigger threshold the condition will be Triggered.


How to Create a TCP/IP Address Network Alert Condition.


1.In the Network Alert Condition Window under This Alert Condition will monitor... check the A TCP/IP Address button.

2.Enter the TCP/IP Address to monitor in the TCP/IP Address field. HINT: Click the Test / Verify button (btnTestVerify) to verify what you entered and do an immediate ping action.

3.Set the Trigger Threshold time out.

4.Enable the condition by checking the Enable This Alert Condition box.

5.Click the OK button to save your changes.